Computer aided modelling of the bending tools for robotic assembly by finite element method (CROSBI ID 465984)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Math, Miljenko ; Jerbić, Bojan ; Mahović, Sanjin
engleski
Computer aided modelling of the bending tools for robotic assembly by finite element method
The control of mechanical spring-back is significantly important in robotics assembly of electronic components and designing of bending tools where the process has to provide very tight shape tolerances. In order to determine the inevitable spring-back angle of bended connector an elastic-plastic incremental finite element analysis has been carried out includiong friction effects and material characteristcs such as work hardening. The accuracy of the simulation results, spring-back angle and the residual stress distribution after unloading are discussed through the comparison with the experimental results.
finite element method; robotic assembly; bending; spring back
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
A-81_A-88-x.
1997.
objavljeno
Podaci o matičnoj publikaciji
CIM 97-Computer integrated Manufacturing and High Speed Machining
Cebalo R. FSB, University of Zagreb
Zagreb: Vedograf, Zagreb
Podaci o skupu
CIM 97, International Conference on production engineering
predavanje
12.07.1997-13.07.1997
Hrvatska