Application of thermography in determining the proportionality limit (CROSBI ID 710405)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Brlić, Tin ; Rešković, Stoja ; Jandrlić, Ivan ; Aleksandrov Fabijanić, Tamara ; Lazić, Ladislav
engleski
Application of thermography in determining the proportionality limit
The determination of the proportionality limit was performed to determine the beginning of the plastic flow of steel during cold deformation as accurately as possible. Measurements were performed by static tensile tests using an extensometer and a thermographic camera. The research has shown that with thermography is possible to determine the beginning of the plastic flow of material with high accuracy.
proportionality limit, plastic flow, thermography, low-carbon steel
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
15-18.
2021.
objavljeno
Podaci o matičnoj publikaciji
Conference proceedings of 11th International scientific-professional conference SBW 2021 „Engineering technologies in manufacturing of welded constructions and products, SBW 2021“
Samardžić, Ivan ; Duspara, Miroslav ; Marić, Dejan
Slavonski Brod: University of Slavonski Brod, Mechanical Engineering Faculty in Slavonski Brod
2806-755X
Podaci o skupu
11th International Scientific-Professional Conference SBW 2021 "Engineering Technologies in Manufacturing of Welded Constructions and Products, SBW 2021" = 11. Međunarodno znanstveno-stručno savjetovanje "Strojarske tehnologije u izradi zavarenih konstrukcija i proizvoda, SBZ 2021."
predavanje
03.11.2021-05.11.2021
Slavonski Brod, Hrvatska
