Production of closed cell foams from the aluminium chip waste (CROSBI ID 707297)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Lela, Branimir ; Krolo, Jure ; Grgić, Karla ; Jozić, Sonja ; Dumanić, Ivana
engleski
Production of closed cell foams from the aluminium chip waste
Aluminium metal foams represent a new generation of materials that are characterized by their lightweight structure and unique properties. This research is based on the production of closed cell foams which are made of aluminium alloy chip waste and TiH2 as a foaming agent. The main task was to investigate the influence of different times and temperatures of foaming as well as a different percentage of TiH2 on mechanical and physical properties of foams. Microhardness, energy absorption, density, and compression properties were observed. Compressive strength and energy absorption are higher with the increase in density, while densification strain is lower. It is also concluded that a longer time and higher temperature of foaming lead to lower density values.
Closed cell foam ; Aluminium foam ; Energy absorption ; Microhardness ; Waste recycling
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
95-100.
2021.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of International conference “Mechanical Technologies and Structural Materials”
Split:
1847-7917
Podaci o skupu
10th International Conference Mechanical Technologies and Structural Materials (MTSM 2021)
poster
23.09.2021-24.09.2021
Split, Hrvatska