INFLUENCE OF HEAT TREATMENT ON PROPERTIES OF LOW-ALLOYED CAST STEEL INTENDED FOR SERVICE AT LOW TEMPERATURES (CROSBI ID 465890)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Unkić, Faruk ; Šešerin, Ivica ; Živčić, Miroslav
engleski
INFLUENCE OF HEAT TREATMENT ON PROPERTIES OF LOW-ALLOYED CAST STEEL INTENDED FOR SERVICE AT LOW TEMPERATURES
The effects of heat treatment parameters on microstructure and mechanical properties in low alloyed cast steel, quality LC3, have been studied. This steel is specified according to ASTM A 352/a, which covers ferritic and martensitic steel casting for pressure containing parts and other application for low temperature service. The specimens were normalised and tempered as well as quenched and tempered at different temperatures. Tensile properties and impact toughness as one of the criteria of selection for low temperature service are considered in relation to obtained microstructure and heat treatment parameters. Charpy V-notch impact values were measured at -101 °C. higher strength and better toughness are obtained from quenched and tempered LC3 steel, compared to normalised and tempered. The correlation between mechanical properties and tempering temperatures was determined.
heat treatment parameters; low alloyed cast steel
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
145-156-x.
1996.
objavljeno
Podaci o matičnoj publikaciji
ZBORNIK REFERATOV 37. LIVARSKEGA STROKOVNEGA POSVETOVANJA S SODELOVANJEM DRŽAV HEKSAGONALE
Trbižan, Milan
Ljubljana: Društvo livarjev Slovenije
Podaci o skupu
37. Livarsko strokovno posvetovanje
predavanje
30.05.1996-31.05.1996
Portorož, Slovenija