Coupled two-carrier planetary gearboxes for two- speed drives (CROSBI ID 706543)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Troha, Sanjin ; Karaivanov, Dimitar ; Vrcan, Željko ; Marković, Kristina ; Šoljić, Antonio
engleski
Coupled two-carrier planetary gearboxes for two- speed drives
The following paper reviews all the possible cases of coupled two-carrier planetary gears with four external shafts. An emphasis is made on the work of these gears with one degree of freedom, one input and one output shaft and brakes on the other two shafts . When switching over the gears, the speed ratio of the gear is changed, thus allowing the use in two-speed mechanical transmissions of technological lifting and other machines. Some relations are deduced for determining the speed ratios and the efficiency of all structural schemes. Recommendations for the selection of the most appropriate structural scheme according to the current necessities can be made. A 3D model of the S13V3 two-speed, two-carrier gearbox was created to demonstrate the process of determining the viability of a particular gearbox layout.
COUPLED PLANETARY GEARS, STRUCTURAL ANALYSIS, EFFICIENCY, 3D MODEL
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
149-155.
2021.
objavljeno
Podaci o matičnoj publikaciji
MACHINES TECHNOLOGIES MATERIALS 2021
Varna:
2535-0021
2535-003X
Podaci o skupu
18th International Scientific Congress "Machines. Technologies. Materials."
predavanje
08.09.2021-11.09.2021
Varna, Bugarska