Direct Torque Control of Induction Motor with Stator Flux Correction (CROSBI ID 489564)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Krušelj, Dubravko ; Bilić, Mario ; Vučetić, Miroslav ; Siladi, Vladimir ; Furčić, Boris
engleski
Direct Torque Control of Induction Motor with Stator Flux Correction
Direct torque control (DTC) method with correction of stator flux vector is presented in the paper. The correction is made by means of appropriate component of stator current vector. Thus, controlled quantities (electromagnetic torque and stator flux) are estimated only from stator parameters and measured stator quantities, and there is no need to use rotor parameters, which are dependent on the operating condition, and rotor quantities, which cannot be measured. With the proposed method stable operation in whole speed range, robust start up with slow change of the torque and fast torque response are achieved.
Induction motors; vector control; estimation techniques
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
403 (Full Paper-x.
2002.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 10th International Power Electronics and Motion Control Conference, EPE-PEMC 2002, 9-11 September 2002, Cavtat & Dubrovnik
Zvonko Benčić
Zagreb: Fakultet elektrotehnike i računarstva Sveučilišta u Zagrebu
Podaci o skupu
10th International Power Electronics and Motion Control Conference EPE-PEMC 2002
poster
09.09.2002-11.09.2002
Dubrovnik, Hrvatska; Cavtat, Hrvatska