Construction and commissioning of CMS CE prototype silicon modules (CROSBI ID 295447)
Prilog u časopisu | stručni rad | međunarodna recenzija
Podaci o odgovornosti
CMS HGCAL Collaboration et al ; Čoko, Duje ; Kristić, Ante ; Musić, Josip ; Ožegović, Julije ; Prvan, Marina ; Puljak, Ivica ;
CMS HGCAL Collaboration
engleski
Construction and commissioning of CMS CE prototype silicon modules
As part of its HL-LHC upgrade program, the CMS collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CEE) and hadronic (CE-H) compartments. The calorimeter will be built with ∼30, 000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1 cm2, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.
Performance of High Energy Physics Detectors ; Si microstrip and pad detectors ; Calorimeters ; Large detector systems for particle and astroparticle physics
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o izdanju
16 (4)
2021.
T04002
35
objavljeno
1748-0221
10.1088/1748-0221/16/04/t04002
Trošak objave rada u otvorenom pristupu
Povezanost rada
Elektrotehnika, Fizika, Interdisciplinarne tehničke znanosti, Računarstvo, Temeljne tehničke znanosti