Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Wood Quality Characterization of Sycamore Maple (Acer pseudoplatanus L.) and its Utilization in Wood Products Industries (CROSBI ID 294725)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Sedlar, Tomislav ; Šefc, Bogoslav ; Stojnić, Srđan ; Sinković, Tomislav Wood Quality Characterization of Sycamore Maple (Acer pseudoplatanus L.) and its Utilization in Wood Products Industries // Croatian journal of forest engineering, 42 (2021), 3; 543-560. doi: 10.5552/crojfe.2021.1099

Podaci o odgovornosti

Sedlar, Tomislav ; Šefc, Bogoslav ; Stojnić, Srđan ; Sinković, Tomislav

engleski

Wood Quality Characterization of Sycamore Maple (Acer pseudoplatanus L.) and its Utilization in Wood Products Industries

This study quantified the physical and mechanical properties of sycamore maple (Acer pseudoplatanus L.) as a basis for assessing wood quality. The physical properties of oven- dry density, density at 12% MC, green density, basic density, longitudinal, radial, tangential and volumetric shrinkages were tested and the mechanical properties of bending strength, modulus of elasticity at bending, compression strength parallel to grain and compression strength in radial and tangential direction as well as of Brinell hardness on the cross, radial, and tangential section were determined. Five sycamore maple trees from Medvednica region were selected for the purposes of this research. The results were compared with known literature data on sycamore maple wood, beech wood from the same sight, and beech wood from Gorski Kotar region. For a better understanding of sycamore maple physiology, as well as for assessing the quality of wood products, the distribution of wood properties within the tree radius, from pith to bark, was investigated. There was a general bell shaped distribution, in the radial direction, in wood density, and mechanical properties of sycamore maple wood. Shrinkages decreased from pith to bark, except for tangential shrinkage with bell shaped pattern. All investigated wood densities of sycamore maple from Medvednica were similar to the findings of studies known in literature, as well as shrinkages, except for the lower longitudinal shrinkage. Investigated mechanical properties of sycamore maple wood were similar to the findings of studies known in literature, except for the lower bending strength and modulus of elasticity (MOE). Investigated sycamore maple indicated better dimensional stability than beech wood from two locations in the region, although it did not match the beech wood regarding mechanical properties, especially wood hardness.

sycamore maple (Acer pseudoplatanus L.), physical properties, mechanical properties, radial variations, wood quality

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

42 (3)

2021.

543-560

objavljeno

1845-5719

10.5552/crojfe.2021.1099

Povezanost rada

Drvna tehnologija, Šumarstvo

Poveznice
Indeksiranost