Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Analysis of the fully-reversed creep-fatigue behavior with tensile-dwell periods of superalloy DZ445 at 900 °C (CROSBI ID 294584)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Ding, Biao ; Ren, Weili ; Zhong, Yunbo ; Yuan, Xiaotan ; Peng, Yianchao ; Zheng, Tianxiang ; Shen, Zhe ; ... Brnić, Josip ; Liaw, Peter, K. Analysis of the fully-reversed creep-fatigue behavior with tensile-dwell periods of superalloy DZ445 at 900 °C // Engineering fracture mechanics, 250 (2021), 107781, 18. doi: 10.1016/j.engfracmech.2021.107781

Podaci o odgovornosti

Ding, Biao ; Ren, Weili ; Zhong, Yunbo ; Yuan, Xiaotan ; Peng, Yianchao ; Zheng, Tianxiang ; Shen, Zhe ; ... Brnić, Josip ; Liaw, Peter, K.

engleski

Analysis of the fully-reversed creep-fatigue behavior with tensile-dwell periods of superalloy DZ445 at 900 °C

High total strain-controlled creep-fatigue tests of 1.8% were performed for a directionally- solidified Ni-based superalloy, DZ445, at 900 °C in air. Dwell times of 0, 2, and 5 min. were introduced at the tensile peak strain for each cycle. Experimental results show a decrease in fatigue life with increasing dwell time. The significant cyclic softening is observed after the application of the dwell time. The mean compressive stress and large plastic-strain accumulation are produced due to the stress relaxation in the tensile-dwell period, resulting in the increase of the hysteresis loop area. The typical single-source crack-initiation and transgranular crack- propagation are transformed into multi-source crack-initiation and mixed transgranular and intergranular crack-propagation mode by these characteristics. Dislocation features are transformed from cutting of γ' precipitates by multiple stacking faults to the mixed mode of dislocation climbing and slipping. The reduction in the fatigue life with increasing the dwell time is well explained on the basis of the mechanical response and damage mechanism. The fatigue life is also predicted by the energy-based life-prediction model.

Superalloy ; Creep-fatigue ; High strain range ; Mechanical response ; Fractography ; Dislocation structure ; Life prediction

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

250

2021.

107781

18

objavljeno

0013-7944

1873-7315

10.1016/j.engfracmech.2021.107781

Povezanost rada

Brodogradnja, Strojarstvo, Temeljne tehničke znanosti

Poveznice
Indeksiranost