Influence of density on tensile and compressive properties of polyurethane foam (CROSBI ID 703012)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Krolo, Paulina ; Bede, Natalija ; Grandić, Davor, Palijan, Ivan
engleski
Influence of density on tensile and compressive properties of polyurethane foam
Polyurethane (PU) foams are widely used in building structures. Due to their good thermal and sound insulation properties, PU foams are often applied in the production of façade systems as a non-structural component. In addition, they are commonly used in structural load-bearing components, e.g. as a core material in composite sandwich panels. In order to be used in load-bearing structures, it is necessary to know their mechanical properties. The main mechanical properties of PU foams are influenced by many parameters such as density, temperature, anisotropy, loading condition, etc. In this paper, the influence of density on tensile and compressive properties of PU foam is presented. Therefore, the uniaxial tension and compression tests according to the International Standards for six different densities were performed. Based on the test results, the influence of density on tensile and compressive strength as well as compressive modulus of elasticity is reported.
polyurethane foam, density, experimental test, tension, compression, compressive modulus of elasticity
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
208-215.
2020.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 2nd International Conference CoMS 2020/21
Šajna, Aljoša ; Legat, Andraž ; Jordan, Sabina ; Horvat, Petra ; Kemperle, Ema ; Dolenc, Sabina, Ljubešek, Metka ; Michelizza, Matej
Ljubljana: Slovenian National Building and Civil Engineering Institute (ZAG)
978-961-94071-8-9
Podaci o skupu
Nepoznat skup
predavanje
29.02.1904-29.02.2096