Exploiting Null Space in Aerial Manipulation through Model-In-The-Loop Motion Planning (CROSBI ID 700907)
Prilog sa skupa u zborniku | sažetak izlaganja sa skupa | međunarodna recenzija
Podaci o odgovornosti
Ivanovic, Antun ; Car, Marko ; Orsag, Matko ; Bogdan, Stjepan
engleski
Exploiting Null Space in Aerial Manipulation through Model-In-The-Loop Motion Planning
This paper presents a method for aerial manipulator end-effector trajectory tracking by encompassing dynamics of the Unmanned Aerial Vehicle (UAV) and null space of the manipulator attached to it in the motion planning procedure. The proposed method runs in phases. Trajectory planning starts by not accounting for roll and pitch angles of the underactuated UAV system. Next, we propose simulating the dynamics on such a trajectory and obtaining UAV attitude through the model. The full aerial manipulator state obtained in such a manner is further utilized to account for discrepancies in planned and simulated end-effector states. Finally, the end-effector pose is corrected through the null space of the manipulator to match the desired end-effector pose obtained in trajectory planning. Furthermore, we have applied the TOPP-RA approach on the UAV by invoking the differential flatness principle. Finally, we conducted experimental tests to verify effectiveness of the planning framework.
uav ; trajectory planning ; model in the loop
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
686-693.
2020.
objavljeno
10.1109/icuas48674.2020.9213914
Podaci o matičnoj publikaciji
Institute of Electrical and Electronics Engineers (IEEE)
Podaci o skupu
2020 International Conference on Unmanned Aircraft Systems (ICUAS 2020)
predavanje
01.09.2020-04.09.2020
Atena, Grčka