engleski

Investigation and Statistical Evaluation of Reinforced Aluminum Foams

In this study, aluminum foams reinforced with different steel elements were produced by the AluLight process. The master alloy AlMgSi0.6 was used as the matrix material, titanium hydride (TiH2) powder was used as a foaming agent, and steel wire, cylindrical steel mesh and flat steel mesh were used as reinforcing elements. Reinforcements were placed inside the mold, along with the precursors, and samples were manufactured by gas releasing particles in a semi-solid state. To examine the effect of the reinforcements on specific energy absorption, quasi-static uniaxial compression tests were carried out, with a constant separation rate of 1 mm/s. From the tested results, the energy absorption per unit volume and specific energy absorption efficiency were calculated and then also statistically evaluated. The results showed that examined shapes of reinforcements affect differently specific energy absorption and its efficiency, compared to non-reinforced aluminum foams. The best result obtained was with cylindrically shaped steel mesh.

reinforced foam ; aluminum ; compression test ; energy absorption ; energy absorption efficiency

nije evidentirano