The fault of the working table rolling bearing as the possible cause of the irregularities in work of vertical lathe machine (CROSBI ID 699628)
Prilog sa skupa u zborniku | izvorni znanstveni rad
Podaci o odgovornosti
Žigulić, Roberto ; Blažević, Sebastijan ; Skoblar, Ante ; Braut, sanjin
engleski
The fault of the working table rolling bearing as the possible cause of the irregularities in work of vertical lathe machine
During the commissioning of the vertical machining lathe centre within the previous overhaul, due to inattention, the rolling bearing of the working table is damaged. With the aim of replacing the damaged part of the rolling bearing the defectation with vibration measurements is performed. The unnaceptable level of vibrations is measured which negatively influenced on the machining quality. Although it was initially suspected that the higher level of vibrations are solely due to mechanical causes frequency content, the more detailed analysis has indicated the appearance of more complex vibrations. i.e. so-called electro – mechanical vibrations.
Vertical lathe machining centre, electromechanical oscillations, rolling bearings, characteristic frequencies, measurements.
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
174-180.
2017.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of Technological forum 2017
Jan Sucharek, Viktor Kreibich
Prag: TISK, s.r.o., Jaromer
978-80-87583-22-7
Podaci o skupu
8th International Technical Conference "Technological Forum 2017"
poster
27.06.2017-29.06.2017
Prag, Češka Republika