engleski

The Effect of Acids on the Chemical Stability of UV Inkjet Prints on Papers with Straw Pulp

The bonding potential of pulp fibers is reduced by the paper recycling process. The most common technique for recovering this lost potential of secondary fibers involves upgrading the recycled pulp by blending it with virgin softwood pulps. In this research, we asses print stability on acid agents of UV inkjet prints when using straw pulp as reinforcing fibers in recycled papers. For that purpose, printing substrates were formed on the Rapid Kothen device from pulp obtained by blending different proportions of straw pulp and pulp of recycled fibers. Each printing substrate was printed in full tone with cyan, magenta, yellow, and black inks by digital technique of UV inkjet printing. Printed substrates were treated with various inorganic and organic acids under the conditions defined in the international standard ISO 2836:2004. Based on the measured spectrophotometric values of the untreated and acid-treated prints, the Euclidean color difference (ΔE00) was defined and the stability of prints was assessed. The results of spectrophotometric measurements indicate small to medium color differences of the prints due to the effect of all acids (ΔE00max.< 2.4) and it can be concluded that straw pulp in printing substrates from recycled fibers contributes to good chemical stability of prints. This research concludes that straw, as an annual renewable resource, can be used in conjunction with waste paper as an alternative to wood, which is currently the dominant raw material for graphic industry and producing paper.

acids, chemical stability, paper, straw pulp, UV inkjet printing

This work has been supported in part by Croatian Science Foundation under the project „Printability, quality and utilization of substrates with non-wood fibres“ (UIP-2017-05- 2573) and by the University of Zagreb.