On-line monitoring of MAG-CMT welding process (CROSBI ID 698975)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Marić, Dejan ; Samardžić, Mijat ; Marsenić, Tihomir ; Šolić Tomislav ; Pavić, Josip ; Samardžić, Ivan ; Despotović, Božo
engleski
On-line monitoring of MAG-CMT welding process
By applying the MAG-CMT welding process, it is possible to protect the boiler elements with Ni-alloys in order to prevent the harmful effects of corrosion. The researches gained insight into the influence of certain parameters of MAG-CMT process on the observed properties (content of delta ferrite less than 5% on the surface of the clad Ni-alloy, slight mixing of the base and filler material while retaining the adequate bonding of the substrate (base material) and the cladding layer (filler material), achieving the uniform thickness of the cladding layer, and reducing the rough transitions between the passages). Main welding parameters of the MAG-CMT process (current, voltage, filler wire feed rate, gas flow) are monitored and analyzed. Based on the observed parameters, the area of stable electric arc of MAG-CMT process is defined.
Overlay cladding, MAG-CMT welding process, Welding parameters, On-line monitoring
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
183-186.
2020.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of The Fifth International Conference – MASING 2020
Janković, Predrag
Niš: Faculty of Mechanical Engineering in Niš
978-86-6055-139-1
2738-103X
Podaci o skupu
MASING 2020
predavanje
09.12.2020-10.12.2020
Niš, Srbija