Comparison of design methods for openings in cylindrical shells under internal pressure reinforced by flush (set-on) nozzles (CROSBI ID 698405)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Kacmarcik, Josip ; Vukojevic, Nedeljko
engleski
Comparison of design methods for openings in cylindrical shells under internal pressure reinforced by flush (set-on) nozzles
In this paper a comprehensive comparison of three design methods for openings in cylindrical shells under internal pressure (pressure vessels) reinforced by flush (set-on) nozzles has been carried out. The design methods are used in EN 13445-3: Unfired pressure vessels-Part 3: Design, ASME pressure vessel code and PD 5500: Specification for unfired fusion welded pressure vessels. The calculation procedures used in the three methods are significantly different, so the comparison has been based on the maximum permissible design pressures for 45 specific geometries calculated using the three methods.
flush nozzle, set-on nozzle, cylindrical pressure vessel
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
1001-1004.
2011.
objavljeno
Podaci o matičnoj publikaciji
PROCEEDINGS 15th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”
Dr. Sabahudin Ekinović, Dr. Joan Vivancos Calvet, Dr. Emin Tacer
Zenica: University of Zenica, Faculty of Mechanical Engineering
1840-4944
Podaci o skupu
15th International Research/Expert Conference ” Trends in the Development of Machinery and Associated Technology”
predavanje
12.09.2011-18.09.2011
Prag, Češka Republika