Design of stiffeners for industrial piping under external pressure using FEM (CROSBI ID 696830)
Prilog sa skupa u zborniku | stručni rad
Podaci o odgovornosti
Vukojević, Nedeljko ; Kačmarčik, Josip ; Žiga, Alma ; Babić, Nedeljko ; Tanasijević, Nemanja
engleski
Design of stiffeners for industrial piping under external pressure using FEM
Stiffening rings are often used as reinforcement in various pressure equipment and their design is covered in different codes. Their implementation can provide more economical solution which satisfies design criteria without further increase of shell thickness. This is especially used in design of pressure vessel and piping under external pressure where failure is mostly caused by loss of stability. In this paper design check of pipe stiffeners is made using EN 13480-3 standard and commercial FEM software. Besides analysis of stiffening rings covered in the standard, use of spiral stiffeners is investigated. The reinforcement effect of the two different stiffener’s types are compared.
Piping, external pressure, stiffener, FEM, EN 13480-3
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
373-378.
2019.
objavljeno
Podaci o matičnoj publikaciji
14th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2019, PROCEEDINGS
Gvero, Petar
Banja Luka: Faculty of Mechanical Engineering, University of Banj Luka
978-99938-39-85-9
Podaci o skupu
14th International Conference on Accomplishments in Mechanical and Industrial Engineering (DEMI 2019)
predavanje
24.05.2019-25.05.2019
Banja Luka, Bosna i Hercegovina