Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Thermal Constants Analysis of Graphene/RT28 HC Nanocomposite and Preparation Technique (CROSBI ID 695682)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Jurčević Mišo, Nižetić Sandro, Čoko Duje, Papadopoulos Agis M., Giama Effrosyni, Arıci Muslum Thermal Constants Analysis of Graphene/RT28 HC Nanocomposite and Preparation Technique. 2019. str. /-/

Podaci o odgovornosti

Jurčević Mišo, Nižetić Sandro, Čoko Duje, Papadopoulos Agis M., Giama Effrosyni, Arıci Muslum

engleski

Thermal Constants Analysis of Graphene/RT28 HC Nanocomposite and Preparation Technique

The effect of adding graphene nanomaterial to the RT28 HC phase change material (PCM) was discussed and analyzed. The complexity of the nanocomposite preparation process was accentuated and briefly described. Graphene nanomaterial was added to the RT28 HC in a 0.5% mass fraction. Transient Plane Source (TPS) method was used to investigate the thermal constants of RT28 HC phase change material and graphene-enhanced nanocomposite. It was found that the addition of graphene nanoparticles improves specific thermal properties of the base PCM such as thermal conductivity and thermal diffusivity while decreasing others such as volumetric specific heat capacity. The thermal conductivity and diffusivity were increased by 12.5% and 15.8%, respectively. The volumetric specific heat capacity was decreased by 3.6%. The residual graph showed that the nanocomposite sample was not properly homogenized, i.e. nanoparticles were not well dispersed. Therefore, the preparation technique should be further improved.

ključna riječ

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

/-/.

2019.

nije evidentirano

objavljeno

Podaci o matičnoj publikaciji

Podaci o skupu

The 3rd Sustainable Process Integration Laboratory Scientific Conference

poster

21.11.2019-22.11.2019

Brno, Češka Republika

Povezanost rada

Strojarstvo