Napredna pretraga

Pregled bibliografske jedinice broj: 108605

Comparison of three different camera calibration types


Pribanić, Tomislav; Cifrek, Mario; Tonković, Stanko
Comparison of three different camera calibration types // Proceedings of XIV Congress of the International Society of Electrophysiology / Kollmitzer, Josef ; Bijak Manfred (ur.).
Vienna, Austria: University of Vienna, Vienna Medical School, 2002. str. 106-107 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Comparison of three different camera calibration types

Autori
Pribanić, Tomislav ; Cifrek, Mario ; Tonković, Stanko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of XIV Congress of the International Society of Electrophysiology / Kollmitzer, Josef ; Bijak Manfred - Vienna, Austria : University of Vienna, Vienna Medical School, 2002, 106-107

Skup
XIV Congress of the International Society of Electrophysiology

Mjesto i datum
Beč, Austrija, 22-25.07.2002

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Camera calibration; 3D reconstruction

Sažetak
Video-based systems for three-dimensional reconstruction during the course of biomechanical analysis are today very popular and common. One of the pre-conditions when using such a systems is so-called camera calibration. The objective of calibration is to determine a set of camera model parameters that describe the mapping between 3D reference coordinates (calibration points) and 2D image coordinates. Traditional approach is by the means of calibration cage. Although very effective and still present in many today&#8217 ; ; ; ; s operating systems, calibration cages tend to be replaced more and more through calibration plane or stick (wand). Using calibration plane or wand make such a 3D reconstruction system a lot more user-friendly [1]. On the other hand, calibration/reconstruction algorithms become more complex and the reconstruction accuracy using only plane/wand is likely to be impaired. The aim of this paper was to investigate these three different types of calibration.

Izvorni jezik
Engleski

Znanstvena područja
Elektrotehnika



POVEZANOST RADA


Projekt / tema
0036007

Ustanove
Fakultet elektrotehnike i računarstva, Zagreb