Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 1079053

Tolerance Analysis of Mechanical Parts


Kondić, Živko; Tunjić, Đuro; Maglić, Leon; Horvatić Novak, Amalija
Tolerance Analysis of Mechanical Parts // Tehnički glasnik - Technical journal, 14 (2020), 3; 265-272 doi:10.31803/tg-20200504092314 (međunarodna recenzija, članak, znanstveni)


CROSBI ID: 1079053 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Tolerance Analysis of Mechanical Parts

Autori
Kondić, Živko ; Tunjić, Đuro ; Maglić, Leon ; Horvatić Novak, Amalija

Izvornik
Tehnički glasnik - Technical journal (1846-6168) 14 (2020), 3; 265-272

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Monte Carlo simulation ; one-way clutch ; Root Sum Square ; tolerance analysis ; Worst Case analysis

Sažetak
The determination of tolerances has a huge impact on the price and quality of products. The objective of tolerance analysis is to provide the widest possible tolerance range of parts, without disturbing the functionality of the assembly. Tolerance analysis should be performed during the design process because then there is still the possibility for change. For the purpose of carrying out the analysis, three methods will be used: Worst Case method, Root Sum Square method and Monte Carlo Simulation. Methods are explained through simple examples and applied on the one-way clutch.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb,
Strojarski fakultet, Slavonski Brod,
Sveučilište Sjever, Koprivnica

Citiraj ovu publikaciju

Kondić, Živko; Tunjić, Đuro; Maglić, Leon; Horvatić Novak, Amalija
Tolerance Analysis of Mechanical Parts // Tehnički glasnik - Technical journal, 14 (2020), 3; 265-272 doi:10.31803/tg-20200504092314 (međunarodna recenzija, članak, znanstveni)
Kondić, Ž., Tunjić, Đ., Maglić, L. & Horvatić Novak, A. (2020) Tolerance Analysis of Mechanical Parts. Tehnički glasnik - Technical journal, 14 (3), 265-272 doi:10.31803/tg-20200504092314.
@article{article, year = {2020}, pages = {265-272}, DOI = {10.31803/tg-20200504092314}, keywords = {Monte Carlo simulation, one-way clutch, Root Sum Square, tolerance analysis, Worst Case analysis}, journal = {Tehni\v{c}ki glasnik - Technical journal}, doi = {10.31803/tg-20200504092314}, volume = {14}, number = {3}, issn = {1846-6168}, title = {Tolerance Analysis of Mechanical Parts}, keyword = {Monte Carlo simulation, one-way clutch, Root Sum Square, tolerance analysis, Worst Case analysis} }

Časopis indeksira:


  • Web of Science Core Collection (WoSCC)
    • Emerging Sources Citation Index (ESCI)


Citati





    Contrast
    Increase Font
    Decrease Font
    Dyslexic Font