Development of a New Alloying System for Tool Steels Based on Thermodynamic Parameters (CROSBI ID 693790)
Prilog sa skupa u zborniku | sažetak izlaganja sa skupa | domaća recenzija
Podaci o odgovornosti
Brajčinović, Sandra
engleski
Development of a New Alloying System for Tool Steels Based on Thermodynamic Parameters
Tool steels for hot work are designed for tools, which are heated during operation to a temperature higher than 200 °C. In such conditions, this group of tool steels is exposed to sudden temperature changes, high mechanical and impact loads, so extremely good properties are required from tool steels for hot work. Tool steels are alloyed with carbide forming elements (Typically: vanadium, tungsten, molybdenum and chromium). Addition of alloying elements serves primarily purpose to improve the hardenabillity and to provide harder and thermally more stable carbides than cementite. Assuming proper heat treatment, the properties of a tool steel strongly depends on which alloying elements are added and their respective concentrations.
Tool steels ; metallurgical processes ; thermodynamics ; alloying elements ; corrosion
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
44-44.
2019.
objavljeno
Podaci o matičnoj publikaciji
5th Annual FAMENA PhD Workshop and 2nd joint Conference of Postgraduate Students DrLMZ
Jokić, Andrej ; Kožuh, Stjepan ; Bauer, Branko ; Degiuli, Nastia ; Duić, Neven ; Landek, Darko ; Lisjak, Dragutin ; Lulić, Zoran ; Matijević, Božidar ; Runje, Biserka ; Sorić, Jurica ; Terze, Zdravko ;
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu ; Metalurški fakultet Sveučilišta u Zagrebu
2671-1567
Podaci o skupu
5th Annual FAMENA PhD Workshop ; 2nd joint Conference of Postgraduate Students
radionica
28.06.2019-28.06.2019
Zagreb, Hrvatska