Corrosion potential of steel embedded in alkali- activated slag (CROSBI ID 693643)
Prilog sa skupa u zborniku | izvorni znanstveni rad | domaća recenzija
Podaci o odgovornosti
Runci, Antonino ; Serdar, Marijana
engleski
Corrosion potential of steel embedded in alkali- activated slag
Alkali-Activated Materials (AAMs) are a group of free clinker binders that are based on aluminosilicate powder and an alkali activator. AAMs have shown high performance in many areas and have attracted great interest because of their lower environmental impact compared to ordinary Portland cement. The aim of this paper is to offer a first assessment on the safety of application of AAMs in marine environments, or where de-icing salts are used. The paper focuses on the alkali-activated ground- granulated blast furnace slag in combination with other by- products originating from Southeast Europe. The setup used to evaluate the corrosion behaviour consists of structural steel plates covered with a layer of mortar, and with tap water or a simulated seawater solution. The corrosion behaviour of structural steel plates was monitored by means of the Open Circuit Potential (OCP).
alkali-activated material, slag, durability, corrosion potential, steel corrosion
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
187-194.
2020.
objavljeno
10.5592/CO/PhDSym.2020.15
Podaci o matičnoj publikaciji
Podaci o skupu
6th Symposium on Doctoral Studies in Civil Engineering
ostalo
07.09.2020-08.09.2020
Zagreb, Hrvatska