Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Numerical Modeling of the Biodrying Process of the Organic Fraction of Municipal Solid Waste (CROSBI ID 692470)

Prilog sa skupa u zborniku | sažetak izlaganja sa skupa

Petrović, Igor ; Kaniški, Nikola Numerical Modeling of the Biodrying Process of the Organic Fraction of Municipal Solid Waste // ATHENS2017 Proceedings / Moustakas, Konstantinos (ur.). Lahti, 2017

Podaci o odgovornosti

Petrović, Igor ; Kaniški, Nikola

engleski

Numerical Modeling of the Biodrying Process of the Organic Fraction of Municipal Solid Waste

Biodrying is an aerobic process during which the moisture content of waste is reduced while the degradation of organic waste is kept to a minimum. The main purpose of the biodrying process, as opposed to the composting process, is not to maximize the degradation of organic material, but to bring about the biodegradation of organic waste to an extent sufficient to produce biologically induced heat to dry the waste via evaporation. The present research was an attempt to numerically model an aerobic bio-oxidation (biodrying) process based on relevant experimental data published in the literature. Moisture content removal and generation of carbon dioxide and ammonia during the biodrying process were examined. Furthermore, the potential of the biodrying process to produce a high quality refuse-derived fuel (RDF) product is discussed. Given its simplicity, the numerical model used in this study did not take into account many important aspects of the biodrying process. However, its usefulness as a first approximation of the real biodrying process, was confirmed.

biodrying, mechanically and biologically treated waste, moisture content, lower heating value, refuse derived fuel, RDF quality

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

2017.

objavljeno

Podaci o matičnoj publikaciji

ATHENS2017 Proceedings

Moustakas, Konstantinos

Lahti:

Podaci o skupu

5th International Conference on Sustainable Solid Waste Management

predavanje

21.06.2017-24.06.2017

Atena, Grčka

Povezanost rada

Interdisciplinarne tehničke znanosti