Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Innovative Type of Micro-Turbine for Organic Rankine Cycle (ORC) on Internal Combustion Engine (ICE) Waste Heat (CROSBI ID 692350)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Klun, Mario ; Guzović, Zvonimir ; Rašković, Predrag Innovative Type of Micro-Turbine for Organic Rankine Cycle (ORC) on Internal Combustion Engine (ICE) Waste Heat // Digital Proceedings of The 4th SDEWES SEE Conference / Ban, Marko ; Duić, Neven ; Guzović, Zvonimir et al. (ur.). Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2020. str. 1-15

Podaci o odgovornosti

Klun, Mario ; Guzović, Zvonimir ; Rašković, Predrag

engleski

Innovative Type of Micro-Turbine for Organic Rankine Cycle (ORC) on Internal Combustion Engine (ICE) Waste Heat

Both the increase in the cost of energy during the past decades and many environmental problems caused by fossil fuel consumption lead that energy savings have been of great importance. In internal combustion engine (ICE) the chemical energy of the fuel is converted into heat through combustion. By some of the thermodynamic cycles, part of heat energy is converted into useful mechanical work. The remaining heat energy is realised into the environment as the waste heat generated from exhaust gas and cooling water. So, ICE typically has a thermodynamic efficiency in the range of 20 to 50%. On the other hand, there is proven, commercially available technology to convert part of the waste heat into electricity. This is Organic Rankine Cycle (ORC), used since several decades in geothermal power plants. Applications of this technology for waste heat recovery are rather premature. The exhaust gases have a temperature in the range 300 oC – 400 oC and thus are very suitable as heat source for an ORC system. Also the jacket cooling water, with temperatures between 80 oC – 90 oC, also can be integrated in ORC system. On this manner the total efficiency of the combined system (ICE and ORC) can be substantially improved. In this paper, energy analysis with aim to improve the recovery of the waste heat of an ICE with Organic Rankine Bottoming Cycle (ORBC) is presented. Considering characteristics of the waste heat of exhaust gas and cooling water, a combined cycle for waste heat recovery of ICE is proposed. The thermodynamic analysis show that in case biogas ICE of 555 kW power a 9.2% increase in the overall power and 3.7% increase in the overall thermodynamic efficiency can be achieved with respect to the engine with no bottoming with ORC. In this paper, special attention is paid to the design of micro- turbine for ORC. It is the innovative axial, action and multistage turbine of effictive power of 57 kW. By using the analytical method a new (non-standard) profiles for stator and rotor blades are designed. The convex and concave sides of the profiles are designed by a polynomials of the fifth degree. Because of achieving high isentropic efficiency of the turbine, the aerodynamic characteristics of the new designed profiles are improved by optimizing their geometry on the basis of numerical modelling of flow in the stator and rotor cascades.

Innovative Type ; Micro-Turbine ; Organic Rankine Cycle (ORC) ; Internal Combustion Engine (ICE) ; Waste Heat

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

1-15.

2020.

nije evidentirano

objavljeno

Podaci o matičnoj publikaciji

Digital Proceedings of The 4th SDEWES SEE Conference

Ban, Marko ; Duić, Neven ; Guzović, Zvonimir ; et. al.

Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu

1847-7178

Podaci o skupu

4th South East Europe Conference on Sustainable Development of Energy, Water and Environment Systems (4th SEE SDEWES Conference)

predavanje

28.06.2020-02.07.2020

Sarajevo, Bosna i Hercegovina

Povezanost rada

Strojarstvo, Temeljne tehničke znanosti