Introduction of biodegradable polymeric materials in the production of printing plates (CROSBI ID 689406)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Mahović Poljaček, Sanja
engleski
Introduction of biodegradable polymeric materials in the production of printing plates
The aim of this research was to produce the printing plate for embossing process made from biodegradable materials. The materials that were used for preparation of polymeric blends were PLA (polylactic acid), PCL (poly(ε-caprolactone)) and coconut fibers. Characterization of obtained blends was performed by measuring of their different mechanical properties. For visual assessment, 2D and 3D analysis of polymer materials and printing lates was carried out. Prepared blends were tested in embossing process for production of relief printed image. The results have shown that there is a great potential in usage of prepared blends for production of printing plates.
printing plate, biodegradable materials, embossing
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
18-24.
2020.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of Joined conference Wood, Pulp and Paper and Polygrafia Academica 2020
Bratislava:
978-80-8208-036-3
Podaci o skupu
Joined conference Wood, Pulp and Paper and Polygrafia Academica 2020
pozvano predavanje
11.03.2020-12.03.2020
Bratislava, Slovačka