Influence of Annealing on Deformability of Welded Tubes (CROSBI ID 488025)
Prilog sa skupa u zborniku | izvorni znanstveni rad
Podaci o odgovornosti
Cajner, Franjo ; Stupnišek, Mladen
engleski
Influence of Annealing on Deformability of Welded Tubes
Specific phenomena in the production of the tube heaters are analyzed. Tubes used for the heater design are fabricated from the INCONEL 600 strip by welding, then rolled to reduced diameter and formed into the required shape. Due to low ductility of the weld metal and heat affected zone, failure of such tubes occur rather frequently during the subsequent forming. Therefore, an annealing betwen welding and forming is required. By varying the annealing parameters, the annealing procedure is experimentally established that provides sufficient ductility of tubes, enabling their bending free of cracks and scrapping.
annealing; deformability; welded tubes
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
631-636-x.
2001.
objavljeno
Podaci o matičnoj publikaciji
Development of welding and allied processes at the beginning of the new millenium : proceedings of the 4th European Conference on Welding, Joining and Cutting
Zagreb: Croatian Welding Society
953-96454-0-9
Podaci o skupu
The 4th European Conference on Weding, Joining and Cutting
predavanje
24.05.2001-26.05.2001
Dubrovnik, Hrvatska; Cavtat, Hrvatska