Tehnologija izrade gornjeg dijela ciklona (CROSBI ID 682450)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Opačak, Ivan ; Starčević, Valnea ; Putnik, Ivan ; Rebronja, Almir ; Özkan, Turgay
hrvatski
Tehnologija izrade gornjeg dijela ciklona
In the modern world, boiler power facilities have found their application within numerous branches of industry, and especially in energetics. Type of fuel combustion in furnace represents one of the significant criteria of boiler division. During the process of combustion, a certain amount of ash -, coil – and another articles are not combusting into the furnace, then going further through the boiler forming the layers on a heating surface such as superheaters, membrane walls, etc., resulting with decreased efficiency of the boiler. The problem of excess layering of unburnt fuel particles on heat surfaces is solved with connecting of the furnace with cyclone, like an additional part of the boiler. By entering the flue gas into the cyclone, the flue gas is being rotated and increases its speed, and unburnt particles are falling at the bottom of the cyclone, where are then returning into the furnace. In this paper manufacturing process of solid matter separators – cyclone is shown, with special reference to the welding technology. Due to its complexity as well as a large number of elements, this paper will be limited just on the manufacturing of upper part of the cyclone, and in the final part of work, assembly of the upper and lower part of the cyclone in one unit will be shown. In addition to the detailed description of the process, the methods for controlling the quality of the welded compound and the final activity will be also described.
kotlovsko postrojenje ; ciklon ; kružna komora ; cijevni paneli ; zavarivanje ; kontrola kvalitete
nije evidentirano
engleski
Technology procedure for cyclone upper part manufacturing
nije evidentirano
boiler plant ; cyclone ; ring header ; tube panel ; welding ; QC
nije evidentirano
Podaci o prilogu
423-436.
2019.
objavljeno
Podaci o matičnoj publikaciji
Samardžić, Ivan ; Duspara, Miroslav
Slavonski Brod: Strojarski fakultet Sveučilišta u Slavonskom Brodu
978-953-6048-95-3
Podaci o skupu
10th International Scientific-Professional Conference SBW 2019 "Engineering Technologies in Manufacturing of Welded Constructions and Products, SBW 2019" = 10. Međunarodno znanstveno-stručno savjetovanje "Strojarske tehnologije u izradi zavarenih konstrukcija i proizvoda, SBZ 2019."
poster
16.10.2019-18.10.2019
Slavonski Brod, Hrvatska