Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 1026010

Comparative Stability Analysis of Chatter in Grinding Process


Stegić, Milenko; Vranković, Nikola; Rastija, Marko; Goja, Željko; Barjašić, Danijel
Comparative Stability Analysis of Chatter in Grinding Process // Advances in Mechanism and Machine Science / Uhl, Tadeusz (ur.).
Krakov, Poljska, 2019. str. 4025-4032 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 1026010 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Comparative Stability Analysis of Chatter in Grinding Process

Autori
Stegić, Milenko ; Vranković, Nikola ; Rastija, Marko ; Goja, Željko ; Barjašić, Danijel

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Advances in Mechanism and Machine Science / Uhl, Tadeusz - , 2019, 4025-4032

Skup
15th IFToMM World Congress on Mechanism and Machine Science

Mjesto i datum
Krakov, Poljska, 30.06.-04.07.2019

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Grinding Process, Stability Analysis, Chatter, Regenerative Model

Sažetak
Chatter, the self-excited vibration between the grinding wheel and the workpiece is a common problem in the grinding process. Chatter not only limits productivity of grinding but also causes poor surface finish and reduced dimensional accuracy. In this paper, the regenerative model of chatter is investigated. The conventional stability analysis is applied to the one-degree-of-freedom regenerative grinding model. The same problem is solved by using the Poincare Lyapunov theorem. The agreement of results is found in the range of equilibrium points. This range is calculated as the ratio of the chatter frequency and the angular velocity of workpiece.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Profili:

Avatar Url Željko Goja (autor)

Avatar Url Nikola Vranković (autor)

Avatar Url Milenko Stegić (autor)

Avatar Url Marko Rastija (autor)

Citiraj ovu publikaciju

Stegić, Milenko; Vranković, Nikola; Rastija, Marko; Goja, Željko; Barjašić, Danijel
Comparative Stability Analysis of Chatter in Grinding Process // Advances in Mechanism and Machine Science / Uhl, Tadeusz (ur.).
Krakov, Poljska, 2019. str. 4025-4032 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Stegić, M., Vranković, N., Rastija, M., Goja, Ž. & Barjašić, D. (2019) Comparative Stability Analysis of Chatter in Grinding Process. U: Uhl, T. (ur.)Advances in Mechanism and Machine Science.
@article{article, editor = {Uhl, T.}, year = {2019}, pages = {4025-4032}, keywords = {Grinding Process, Stability Analysis, Chatter, Regenerative Model}, title = {Comparative Stability Analysis of Chatter in Grinding Process}, keyword = {Grinding Process, Stability Analysis, Chatter, Regenerative Model}, publisherplace = {Krakov, Poljska} }




Contrast
Increase Font
Decrease Font
Dyslexic Font