Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 1023301

Cutting Performance Of Deep Cryogenic Treated And Nitrided Hss Cutting Tool Inserts


Šolić, Sanja; Schauperl, Zdravko; Tropša, Vlado
Cutting Performance Of Deep Cryogenic Treated And Nitrided Hss Cutting Tool Inserts // Tehnički glasnik - Technical Journal, 13 (2019), 4; 213-217 doi:10.31803/tg-20190513114458 (međunarodna recenzija, članak, znanstveni)


CROSBI ID: 1023301 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Cutting Performance Of Deep Cryogenic Treated And Nitrided Hss Cutting Tool Inserts

Autori
Šolić, Sanja ; Schauperl, Zdravko ; Tropša, Vlado

Izvornik
Tehnički glasnik - Technical Journal (1846-6168) 13 (2019), 4; 213-217

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
cutting tools, deep cryogenic treatment, high speed steel, nitriding, wear resistance

Sažetak
High speed steel (HSS) is a very important industrial tool material and has been constantly improved for different wear resistance applications and cutting tools, i.e. drills, milling cutters, hobs and for the cutting tools in which the economical cutting speed is too low for choosing the carbide tools. The properties of HSS depend significantly on the parameters of the conducted heat treatment. In this paper, the influence of deep cryogenic treatment in combination with nitriding of metallurgical powder metallurgy HSS on the wear resistance was measured. Additionally, the cutting performance in a single point cutting tool machinability test at the configuration of the dry low-speed turning of steel was investigated. The results showed that deep cryogenic treatment itself, and in combination with nitriding, resulted in the reduction of the wear rate. The results of the single point cutting tool machinability test showed that deep cryogenic treated and nitrided HSS inserts performed worse than the classically heat-treated inserts and deep cryogenic treated HSS inserts exhibited approximately the same flank wear as the nitrided ones.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo, Temeljne tehničke znanosti



POVEZANOST RADA


Ustanove:
Sveučilište Sjever, Koprivnica

Profili:

Avatar Url Zdravko Schauperl (autor)

Avatar Url Sanja Šolić (autor)

Avatar Url Vlado Tropša (autor)

Citiraj ovu publikaciju

Šolić, Sanja; Schauperl, Zdravko; Tropša, Vlado
Cutting Performance Of Deep Cryogenic Treated And Nitrided Hss Cutting Tool Inserts // Tehnički glasnik - Technical Journal, 13 (2019), 4; 213-217 doi:10.31803/tg-20190513114458 (međunarodna recenzija, članak, znanstveni)
Šolić, S., Schauperl, Z. & Tropša, V. (2019) Cutting Performance Of Deep Cryogenic Treated And Nitrided Hss Cutting Tool Inserts. Tehnički glasnik - Technical Journal, 13 (4), 213-217 doi:10.31803/tg-20190513114458.
@article{article, year = {2019}, pages = {213-217}, DOI = {10.31803/tg-20190513114458}, keywords = {cutting tools, deep cryogenic treatment, high speed steel, nitriding, wear resistance}, journal = {Tehni\v{c}ki glasnik - Technical Journal}, doi = {10.31803/tg-20190513114458}, volume = {13}, number = {4}, issn = {1846-6168}, title = {Cutting Performance Of Deep Cryogenic Treated And Nitrided Hss Cutting Tool Inserts}, keyword = {cutting tools, deep cryogenic treatment, high speed steel, nitriding, wear resistance} }
@article{article, year = {2019}, pages = {213-217}, DOI = {10.31803/tg-20190513114458}, keywords = {cutting tools, deep cryogenic treatment, high speed steel, nitriding, wear resistance}, journal = {Tehni\v{c}ki glasnik - Technical Journal}, doi = {10.31803/tg-20190513114458}, volume = {13}, number = {4}, issn = {1846-6168}, title = {Cutting Performance Of Deep Cryogenic Treated And Nitrided Hss Cutting Tool Inserts}, keyword = {cutting tools, deep cryogenic treatment, high speed steel, nitriding, wear resistance} }

Časopis indeksira:


  • Web of Science Core Collection (WoSCC)
    • Emerging Sources Citation Index (ESCI)


Citati





    Contrast
    Increase Font
    Decrease Font
    Dyslexic Font