Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 1021190

Development of a CFD Solver for Primary Diesel Jet Atomization in FOAM-Extend


Vukcevic, Vuko; Keser, Robert; Jasak, Hrvoje; Battistoni, Michele; Im, Hong; Roenby, Johan
Development of a CFD Solver for Primary Diesel Jet Atomization in FOAM-Extend // 14th International Conference on Engines & Vehicles
Italija, Capri: SAE International, 2019. 2019, 14 doi:10.4271/2019-24-0128 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo)


CROSBI ID: 1021190 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Development of a CFD Solver for Primary Diesel Jet Atomization in FOAM-Extend

Autori
Vukcevic, Vuko ; Keser, Robert ; Jasak, Hrvoje ; Battistoni, Michele ; Im, Hong ; Roenby, Johan

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), ostalo

Skup
14th International Conference on Engines & Vehicles

Mjesto i datum
Italija, Capri, 15.-19.09.2019

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
COMBUSTION CHAMBERS ; CFD ; COMBUSTION AND COMBUSTION PROCESSES ; SIMULATION AND MODELING ; PRESSURE ; NOZZLES

Sažetak
Ongoing development of a CFD framework for the simulation of primary atomization of a high pressure diesel jet is presented in this work. The numerical model is based on a second order accurate, polyhedral Finite Volume (FV) method implemented in foam-extend-4.1, a community driven fork of the OpenFOAM software. A geometric Volume-of-Fluid (VOF) method isoAdvector is used for interface advection, while the Ghost Fluid Method (GFM) is used to handle the discontinuity of the pressure and the pressure gradient at the interface between the two phases: n-dodecane and air in the combustion chamber. In order to obtain highly resolved interface while minimizing computational time, an Adaptive Grid Refinement (AGR) strategy for arbitrary polyhedral cells is employed in order to refine the parts of the grid near the interface. Dynamic Load Balancing (DLB) is used in order to preserve parallel efficiency during AGR. The combination of isoAdvector-GFM-AGR-DLB presents a unique framework for diesel jet atomization. The developed numerical framework is preliminarily tested on the Engine Combustion Network (ECN) Spray D geometry and conditions. The unstructured, mostly hexahedral grid is used with the base cell size of 40 micrometres. Four refinement levels are used in the close proximity of the interface in order to attempt to resolve break-up of droplets. The finest cells near the interface have the size of 2.5 micrometres. Part of the nozzle is also considered in the simulation in order to capture the developed jet profile at the entry into the combustion chamber. The temporal evolution of the jet is presented, along with the preliminary comparison of droplet statistics with available results.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb

Profili:

Avatar Url Vuko Vukčević (autor)

Avatar Url Robert Keser (autor)

Avatar Url Hrvoje Jasak (autor)

Citiraj ovu publikaciju

Vukcevic, Vuko; Keser, Robert; Jasak, Hrvoje; Battistoni, Michele; Im, Hong; Roenby, Johan
Development of a CFD Solver for Primary Diesel Jet Atomization in FOAM-Extend // 14th International Conference on Engines & Vehicles
Italija, Capri: SAE International, 2019. 2019, 14 doi:10.4271/2019-24-0128 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo)
Vukcevic, V., Keser, R., Jasak, H., Battistoni, M., Im, H. & Roenby, J. (2019) Development of a CFD Solver for Primary Diesel Jet Atomization in FOAM-Extend. U: 14th International Conference on Engines & Vehicles doi:10.4271/2019-24-0128.
@article{article, year = {2019}, pages = {14}, DOI = {10.4271/2019-24-0128}, chapter = {2019}, keywords = {COMBUSTION CHAMBERS, CFD, COMBUSTION AND COMBUSTION PROCESSES, SIMULATION AND MODELING, PRESSURE, NOZZLES}, doi = {10.4271/2019-24-0128}, title = {Development of a CFD Solver for Primary Diesel Jet Atomization in FOAM-Extend}, keyword = {COMBUSTION CHAMBERS, CFD, COMBUSTION AND COMBUSTION PROCESSES, SIMULATION AND MODELING, PRESSURE, NOZZLES}, publisher = {SAE International}, publisherplace = {Italija, Capri}, chapternumber = {2019} }

Časopis indeksira:


  • Scopus


Citati





    Contrast
    Increase Font
    Decrease Font
    Dyslexic Font