Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 1014864

Characterisation of Polyamide (PA)12 Nanocomposites with Montmorillonite (MMT) Filler Clay Used for the Incremental Forming of Sheets


Borić, Andrej; Kalendová, Alena; Urbanek, Michal; Pepelnjak, Tomaž
Characterisation of Polyamide (PA)12 Nanocomposites with Montmorillonite (MMT) Filler Clay Used for the Incremental Forming of Sheets // Polymers, 11 (2019), 8; 1248, 20 doi:10.3390/polym11081248 (međunarodna recenzija, članak, znanstveni)


CROSBI ID: 1014864 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Characterisation of Polyamide (PA)12 Nanocomposites with Montmorillonite (MMT) Filler Clay Used for the Incremental Forming of Sheets

Autori
Borić, Andrej ; Kalendová, Alena ; Urbanek, Michal ; Pepelnjak, Tomaž

Izvornik
Polymers (2073-4360) 11 (2019), 8; 1248, 20

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
polymer ; nanocomposite ; polyamide ; PA12 ; clay ; Cloisite 93A ; morphology ; mechanical properties

Sažetak
In this paper, the preparation and characterisation of polymer materials suitable for single point incremental forming (SPIF) technology were performed. Three different kinds of mixtures were selected: a mixture of neat polyamide 12 (PA12), a nanocomposite with PA12 matrix and 1% clay (Cloisite 93A), and a nanocomposite with PA12 matrix and 3% clay (Cloisite 93A). Materials were produced using a melt intercalation method followed by compression moulding. According to the needs of SPIF technology, morphological and mechanical properties were investigated in the obtained mixtures. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) were used to characterize morphological properties. It was determined that the most desired obtained exfoliated structure of clay in the polymer matrix was achieved. Static tensile testing and dynamic mechanical analysis as well as thedetermination of glass transition temperatureand crystallinity of all analysed materials were used to obtain mechanical and thermal properties of the mixtures. The results obtained for each mixture were compared with respect to the content of clay. The content of clay (Cloisite 93A) showed a strong influence on the properties of the obtained materials. The presence of clay (Cloisite 93A) affected the increase of tensile strength and Young’s modulus, while its influence on the attained elongation was not unique.

Izvorni jezik
Engleski

Napomena
Special Issue Polymer Matrix Composites for
Advanced Applications



POVEZANOST RADA


Projekti:
NadSve-Sveučilište u Rijeci-uniri-tehnic-18-100 - Primjena tehnologija inkrementalnog oblikovanja u individualnoj proizvodnji izradaka iz naprednih polimernih materijala (Jurković, Zoran, NadSve ) ( POIROT)

Profili:

Avatar Url Andrej Borić (autor)

Poveznice na cjeloviti tekst rada:

doi www.mdpi.com

Citiraj ovu publikaciju:

Borić, Andrej; Kalendová, Alena; Urbanek, Michal; Pepelnjak, Tomaž
Characterisation of Polyamide (PA)12 Nanocomposites with Montmorillonite (MMT) Filler Clay Used for the Incremental Forming of Sheets // Polymers, 11 (2019), 8; 1248, 20 doi:10.3390/polym11081248 (međunarodna recenzija, članak, znanstveni)
Borić, A., Kalendová, A., Urbanek, M. & Pepelnjak, T. (2019) Characterisation of Polyamide (PA)12 Nanocomposites with Montmorillonite (MMT) Filler Clay Used for the Incremental Forming of Sheets. Polymers, 11 (8), 1248, 20 doi:10.3390/polym11081248.
@article{article, author = {Bori\'{c}, Andrej and Kalendov\'{a}, Alena and Urbanek, Michal and Pepelnjak, Toma\v{z}}, year = {2019}, pages = {20}, DOI = {10.3390/polym11081248}, chapter = {1248}, keywords = {polymer, nanocomposite, polyamide, PA12, clay, Cloisite 93A, morphology, mechanical properties}, journal = {Polymers}, doi = {10.3390/polym11081248}, volume = {11}, number = {8}, issn = {2073-4360}, title = {Characterisation of Polyamide (PA)12 Nanocomposites with Montmorillonite (MMT) Filler Clay Used for the Incremental Forming of Sheets}, keyword = {polymer, nanocomposite, polyamide, PA12, clay, Cloisite 93A, morphology, mechanical properties}, chapternumber = {1248} }
@article{article, author = {Bori\'{c}, Andrej and Kalendov\'{a}, Alena and Urbanek, Michal and Pepelnjak, Toma\v{z}}, year = {2019}, pages = {20}, DOI = {10.3390/polym11081248}, chapter = {1248}, keywords = {polymer, nanocomposite, polyamide, PA12, clay, Cloisite 93A, morphology, mechanical properties}, journal = {Polymers}, doi = {10.3390/polym11081248}, volume = {11}, number = {8}, issn = {2073-4360}, title = {Characterisation of Polyamide (PA)12 Nanocomposites with Montmorillonite (MMT) Filler Clay Used for the Incremental Forming of Sheets}, keyword = {polymer, nanocomposite, polyamide, PA12, clay, Cloisite 93A, morphology, mechanical properties}, chapternumber = {1248} }

Časopis indeksira:


  • Current Contents Connect (CCC)
  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus


Citati:





    Contrast
    Increase Font
    Decrease Font
    Dyslexic Font