The influence of the loading rate on the mechanical properties of drawing steel sheet (CROSBI ID 679499)
Prilog sa skupa u zborniku | sažetak izlaganja sa skupa | međunarodna recenzija
Podaci o odgovornosti
Buršak, M. ; Mamuzić, Ilija
engleski
The influence of the loading rate on the mechanical properties of drawing steel sheet
The paper analyzes the influence of the loading rate in the interval from 1 to 1000 mm/min on the mechanical properties of drawing steel sheet H260LAD with lie gauge of 1 mm, used for the manufacture of automotive parts, under tension and bending conditions. It describes the aspects of material characteristics under tension and bending conditions, while bending tests were made on notched specimens (a modified impact bending test). The paper presents knowledge using a modified notch toughness test it is possible to achieve the pressability (formability) characteristics corresponding to dynamic strain.
steel ; sheet loading rate ; drawing ; mechanical properties
Tiskano u: Metalurgija 45 (2006) 3, 203.
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
203-203.
2006.
objavljeno
Podaci o matičnoj publikaciji
Sažeci predavanja sa 7. Međunarodnog simpozija Hrvatskog metalurškog društva, "Materijali i metalurgija"
Mamuzić, Ilija
Zagreb: Hrvatsko metalurško društvo
Podaci o skupu
7. Međunarodni simpozij Hrvatskog metalurškog društva, "Materijali i metalurgija"
poster
18.06.2006-22.06.2006
Šibenik, Hrvatska