Development of bake hardening effect by plastic deformation and annealing conditions (CROSBI ID 679497)
Prilog sa skupa u zborniku | sažetak izlaganja sa skupa | međunarodna recenzija
Podaci o odgovornosti
Kvačkaj, T. ; Mamuzić, Ilija
engleski
Development of bake hardening effect by plastic deformation and annealing conditions
The paper deals with the classification of steel sheets for automotives industry on the basis of strength and structural characteristics. Experimental works were aimed to obtain the best possible strengthening parameters as well as work hardening and solid solution ferrite hardening, which are the result of thermal activation of interstitial carbon atoms during paint-baking of auto body. As resulting from the experimental results, the optimal treatment conditions for the maximal sum (WH+BH)=86 MPa are as follows : total cold rolling deformation = 65 % , annealing temperature T=700 °C.
plastic deformation ; steel sheets ; strength ; structure ; annealing
Tiskano u: Metalurgija 45 (2006) 3, 200.
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
200-200.
2006.
objavljeno
Podaci o matičnoj publikaciji
Sažeci predavanja sa 7. Međunarodnog simpozija Hrvatskog metalurškog društva, "Materijali i metalurgija"
Mamuzić, Ilija
Zagreb: Hrvatsko metalurško društvo
Podaci o skupu
7. Međunarodni simpozij Hrvatskog metalurškog društva, "Materijali i metalurgija"
poster
18.06.2006-22.06.2006
Šibenik, Hrvatska